DIY Project: How To Build Pipe Shelves

Have you been on a desperate search to find the perfect open pipe shelves?  I’ve got you… search no longer!  With this quick and easy tutorial, you can build the perfect industrial shelving unit to fit your space.

It takes a little time, patience, some elbow grease and the supplies below…

Supplies

  •  Power drill
  •  Stud finder
  •  Two (per shelf) 3/4 in. diameter black iron floor flange fitting
  •  Two (per shelf) 3/4 in. diameter black iron cap fitting
  •  Two (per shelf)  3/4 in. 10 in. black pipe nipple
  •  Wooden Plank (one per shelf)
  •  Level
  • #6 Drywall Screws, 2 in. in black
  • Mr. Clean Magic Eraser

How To Build Pipe Shelves

Instructions

1. Start off by determining the size of the shelving unit and where you would like it to hang.

2.  Locate the studs in your wall to determine the pipe placement for both sides.  This may determine the overall size of your unit.

Continue reading “DIY Project: How To Build Pipe Shelves”

DIY Project: How to Chalk Paint a Mirror

About a month ago, my bestie, Morgan, moved into an apartment in Chicago.  She wanted her new space to feel cozy and comfortable without having to spend a lot of money.  She’s currently in grad school so keeping it cheap was a must!  She expressed the need for a get-ready station in her bedroom since she shares one small bathroom with her roommate.  We looked all over for a simple vanity that would fit the space.  The ones we found were either too expensive or just not quite right.  So instead, we decided to refinish some old furniture pieces that she already had using chalk paint.

We spruced up the small table by using Annie Sloan Chalk Paint in Graphite with Annie Sloan Soft Wax in Clear over the top.  For the technique we used, just check out this past blog post… Transforming a Garage Sale Find with Chalk Paint.

For the mirror, here’s what we did…

Supplies

 

Instructions

  1.  Start off with an old mirror you’re looking to transform.  We used this old gaudy gold mirror pictured below or a wooden frame could work as well.

IMG_8362

2.  Brush the edges of the mirror off with a dust rag to insure you’re starting with a clean surface.

3.  Use the painter’s tape to create a rectangle around the outer edge where the mirror meets the frame.  Be sure to take your time and get as close to the edge of the frame as possible.  This will insure a clean edge between the painted frame and the mirrored surface.  You will be taping right on the mirror’s surface.

Continue reading “DIY Project: How to Chalk Paint a Mirror”

DIY Project: How to Build a Barnwood Headboard

I absolutely love long weekends.  I just feel like you can be so much more productive while still leaving time for some fun and relaxation.  This 4th of July weekend was no exception.  Between concerts and pool parties, I still had the opportunity to take a trip to the Kane County Flea Market.

I brought along my bestie who was a flea market virgin.  It’s safe to say she thoroughly enjoyed the experience, and we’ll definitely be heading back again soon.  While at the flea market, we picked up some reclaimed barnwood from a local vendor for a big time DIY project.  Her and I have been talking about taking on building a headboard for some time now.  Originally we thought we wanted to use pallet wood, but when we saw the beautiful, gray-weathered barnwood, we knew that it would be just perfect.

Now, I must say, the thought of creating a headboard can be fairly intimidating just based on the sheer size of the project alone.  But honestly, the form and design is fairly straightforward so this can be a very simple DIY as long as you have access to all the tools you need.  So if you’re looking to give your bedroom a rustic refresh, this is for you!

  Materials

  • Salvaged barn wood
  • 160 grit sand paper discs
  • Wood Screws (we used 1.5 in., but this will depend on the thickness of your wood)
  • (2) 1 in. x 6 in. x 6 ft. Common Board
  • Minwax Polycrylic Protective Finish – clear satin
  • (4) 2″ bolts with 5/8 hex nut (optional)

Tools

  • Power drill
  • Orbital sander
  • Circular saw
  • Protective eyewear and mask

Instructions

  1.  First, you’ll want to determine the desired width of your headboard.  I’ve listed the standard widths for each bed size here:

Twin  39 inches

Twin XL 39 inches

Full  54 inches

Full XL 54 inches

Queen 60 inches

King 76 inches

California King 72 inches

For my queen headboard, I decided to go with 62 inches wide leaving just an inch on each side.  Luckily for me, the barnwood I got measured perfectly.  If it’s too long, you’ll need to measure, mark and saw to your desired size.

Continue reading “DIY Project: How to Build a Barnwood Headboard”

The Best Industrial Decor from Target

How do I love thee, Target?  Let me count the ways.  But seriously though, is Target not the best?  I mean… what other store can you walk into looking to buy just one thing and you walk out with a trendy outfit, some seasonal Dollar Spot finds and a bunch of new home decor?

Target has to be one of my favorite spots to shop for home furnishings.  Not only is it budget-friendly, but it’s always on trend, and they really have something for every style.  Lately, I have been loving all of the industrial elements I see in interior design.  I’ve thoroughly searched Target to pick out the best industrial decor items.

TargetIndustrialDecor

1.  Real Wood Floating Shelf – Threshold

Floating shelves are in!  I’ve seen them used in bathrooms, dining rooms and everywhere in between.  I really love them in all spaces.  These real wood floating shelves come in three different sizes so that you can style them in any size space, or you can stagger them with all different sizes for a more unique look.

Continue reading “The Best Industrial Decor from Target”

Transforming a Garage Sale Find with Chalk Paint

My mother-in-law is the queen of garage sales. She’s a woman of many talents, but her garage sale skills are top notch. She once bought a high top wooden kitchen table with four chairs for $5. After four years, we still have it in our house. That’s skill!

One of my favorite finds that she brought home last summer was a coffee table/end table set that she got for $30. The set is great quality, super sturdy and heavy with black iron piping on the bottom shelf.

img_7233

img_7232

When transforming a piece of furniture, I think it’s so important to start with a quality piece in order to transform it into a quality piece.

Fixing this baby up was super simple… if you’re willing to dedicate the time, anyone can do it. Here we go:

Supplies

  •  Scotch Blue Painter’s Tape
  •  Annie Sloan Chalk Paint – pure white
  •  Annie Sloan Chalk Paint – old white
  • Annie Sloan Soft Wax – clear
  •  Various sizes of paint brushes
  •  Sandpaper
  •  Clean rag or shop towel

img_7234

Continue reading “Transforming a Garage Sale Find with Chalk Paint”